(888) 686-8265 Lowest Prices Best Shipping Rates

3" Round Leaf Eater Advanced Rain Head

3" Round Leaf Eater Advanced Rain Head
Images may be inaccurate. See specs table below to ensure accuracy.
Minimal maintenance
High flow rate performance
Included adaptor for secure connection to downspout
Compact, versatile rain head for quick and easy installation
Pivot the outlet to suit vertical or horizontal downspouts (VH Pivot™)
$45.99
Description

Details

Rain Harvesting Leaf Eater Advanced Rain Head, part# RHAD99 is the next generation Rain Head, featuring the new Clean Shield™ (single screen) technology and VH Pivot™ outlet. The Leaf Eater Advanced™ Rain Head prevents debris from entering the Rain Harvesting system, improves water quality and reduces tank/cistern maintenance.

The single screen incorporates Clean Shield™ technology which deflects leaves and debris away from the flow of water. This minimises maintenance and enhances catchment efficiency. This Rain Head incorporates a VH Pivot™ outlet that swivels to suit vertical or horizontal downspouts. The Leaf Eater Advanced™ can also be used as a debris removing device even when rainwater is not being collected.

Leaf Eater Advanced Pivot

Installation Instructions

Gutter & Mid-Mount Installation

1.  Gutter: Measure 10½” from the bottom of the existing gutter pop and remove this section of downspout. Ensure the cut edge is clean and smooth. Mid-Mount: Remove 10½” of downspout where the Leaf Eater Advanced™ is to be situated. Ensure all cut edges are clean and smooth. (figure 1)

2.  Using the quick release tabs remove the Clean Shield™ screen by lifting it up and then out. (figure 2)

3.  Insert the Leaf Eater Advanced™ by sliding it up over the cut section and then down into position. The Leaf Eater Advanced™ outlet should be slid firmly onto the bottom down pipe until it can be pushed no further. (figure 3)

4. Screw the Leaf Eater Advanced™ into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)

5. Insert the Clean Shield™ screen into the Leaf Eater Advanced™. Ensure the Clean Shield™ screen is sitting firmly in place and check installation is secure. (figure 6)

Leaf Eater Advanced Installation Image

Horizontal (Rear Outlet) Installation

1.  Using the quick release tabs remove the Clean Shield™ screen by lifting it up and then out. (Figure 2)

2.  Swivel the outlet to the horizontal position – some force may be required.

3.  Position the Leaf Eater Advanced™ next to existing pipework, mark and cut top and bottom cut lines as per figure 4. Ensure the cut edge is clean and smooth.

4.  Insert the Leaf Eater Advanced™ by sliding the rear outlet into the horizontal pipe. The back fixing plate must sit behind the top section of downspout. (figure 3)

5.  Screw the Leaf Eater Advanced™ into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)

6.  Insert the Clean Shield™ screen into the Leaf Eater Advanced™. Ensure the Clean Shield™ screen is sitting firmly in place and check installation is secure. (figure 6)

Show More

Size Comparison

image of man
At Scale
Specifications

Additional Information

Store ID X1123355
Manufacturer Info
Product Part # RHAD100
Former MPN's RHAD99
Manufacturer Rain Harvesting
Installation Instructions Rain Harvesting Installation Instructions
Brochure Rain Harvesting Product Specifications
Physical Features
Weight (lbs) 4
Dimensions 7.6" Length x 6.6" Width x 11.5" Height
Color Natural White
Product Type Leaf Eater
Shipping Info
Shipping Locations California
Shipping Zip Codes 60504
phone
live chat
find tank