(888) 686-8265 Lowest Prices Best Shipping Rates

3" Round Leaf Eater Original Rain Head

3" Round Leaf Eater Original Rain Head
Images may be inaccurate. See specs table below to ensure accuracy.
Minimal maintenance
Includes a flow directional rectangular PVC gutter outlet
Prevents debris from entering the tank improving tank water quality and maintenance
Prevents blocked downspouts which stops the backflow of water into gutters and leaves
Can be mid-mounted on a wall making them easy to access for cleaning



Rain Harvesting Leaf Eater Original, part# RHLE99 is the ultimate high performance rain head. Not only does it protect the home by preventing gutters from blocking and flooding eaves, the Leaf Eater also improves water quality and reduces tank/cistern maintenance. The Leaf Eater is ideal for use purely as a debris removing device even when rainwater is not being collected. The Leaf Eater incorporates a flow directional gutter outlet which directs the flow of water from the gutter onto the face of the primary screen.

Installation Instructions

At Gutter Installation

1.  Remove the existing Gutter Outlet from the roof guttering system.

2.  Hold the new Gutter Outlet against the fascia and against the bottom and rear of the gutter where the new outlet hole is to be. Use the Gutter Outlet as a template, draw around the inside of the outlet to mark the underside of the gutter for the new hole and cut out with tin snips. Refit the Gutter Outlet to the main body and place a small amount of sealant in the sealant groove.

3.  Mount the main body of the Leaf Eater Original evenly under the Gutter Outlet by securing it to the fascia with pop rivets or screws, making sure the backing plate fits snug up to the bottom edge of the gutter but NOT between the fascia and back edge of the gutter.

4.  Place the Mozzie Screen in the main body over the Leaf Eater Original outlet ensuring that the screen clips into place. Replace the primary screen, making sure the screen fits INSIDE the front lip of the Leaf Eater Original and secure in place with the clips provided. The Leaf Eater Original is now ready for connection to the downspout. DO NOT glue the Leaf Eater Original to the downspout. SECURE with a screw for easy removal.

Mid-Mount Installation

To improve access for cleaning, Leaf Eater Original Rain Heads can be mounted on a wall at a convenient height. When ‘pushing water’ over long runs and depending on the volume of water required to be moved, the Rain Head may need to be mid-mounted more than 4 feet above the discharge point.

It is important to note that when mid-mounting, the flow directional benefits of the rectangular gutter outlet supplied with the Leaf Eater Original will be lost. However this is to be balanced with the benefits gained from easier access for maintenance.

For mid-mounting, discard the top flow-directional gutter outlet. Cut the entry downspout at 45° allowing 2″ clearance between the pipe and the primary screen. This ensures the end of the pipe is parallel to the screen and helps direct the water onto the face of the screen most effectively.

Leaf Eater Original Diagram

Show More

Size Comparison

image of man
At Scale

Additional Information

Store ID X9004275
Manufacturer Info
Product Part # RHLE99
Manufacturer Rain Harvesting
Installation Instructions Rain Harvesting RHLE99 Installation Instructions
Physical Features
Weight (lbs) 5
Dimensions 10.7" Length x 1.4" Width x 11.4" Height
Color Natural White
Product Type Leaf Eater
Shipping Info
Shipping Locations Georgia
Shipping Zip Codes 30309
live chat
find tank